Title
Sinterability of cordierite powders synthesized by different sol-gel methods
Creator
El Buaishi, Nozhat Moftah. 1966-
Copyright date
2013
Object Links
Select license
Autorstvo-Nekomercijalno-Bez prerade 3.0 Srbija (CC BY-NC-ND 3.0)
License description
Dozvoljavate samo preuzimanje i distribuciju dela, ako/dok se pravilno naznačava ime autora, bez ikakvih promena dela i bez prava komercijalnog korišćenja dela. Ova licenca je najstroža CC licenca. Osnovni opis Licence: http://creativecommons.org/licenses/by-nc-nd/3.0/rs/deed.sr_LATN. Sadržaj ugovora u celini: http://creativecommons.org/licenses/by-nc-nd/3.0/rs/legalcode.sr-Latn
Language
English
Cobiss-ID
Theses Type
Doktorska disertacija
description
Datum odbrane: 02.12.2013.
Other responsibilities
mentor
Petrović, Rada, 1965-
član komisije
Janaćković, Đorđe, 1964-
član komisije
Grujić, Snežana, 1964-
član komisije
Veljović, Đorđe
Academic Expertise
Tehničko-tehnološke nauke
University
Univerzitet u Beogradu
Faculty
Tehnološko-metalurški fakultet
Alternative title
Proučavanje sinterabilnosti kordijeritnih prahova sintetizovanih različitim sol-gel postupcima.
Publisher
[N. M. El Buaishi]
Format
106 listova
description
Chemistry and Chemical Technology - Ceramic Materials / HEMIJA I HEMIJSKA TEHNOLOGIJA - Keramički materijali
Abstract (en)
Dense cordierite-based ceramic is a promising material for technological
applications due to its low thermal expansion and dielectric constant, and high chemical
and thermal stability. Cordierite ceramics can be prepared by conventional methods,
such as solid state reaction technique and crystallization out of glasses. However, it is
difficult to sinter cordierite without sintering aids because of the narrow sintering range
just before its incongruent melting point. These aids, on the other hand, increase the
thermal expansion coefficient and dielectric constant. Some attempts have been made to
improve the sinterability of cordierite. By wet chemical routes, cordierite powders with
favorable sintering behavior can be synthesized. It is well known that the sol-gel method
has the advantage of an excellent control of chemical composition and the possibility of
reducing the sintering temperature.
In this dissertation, the sinterability of cordierite powders obtained by different
sol-gel methods was studied. The cordierite powders were synthesized by colloidal and
alkoxide sol-gel methods and starting from silicic acid and magnesium and aluminum
salts. Phase transformation and shrinkage during heating of gel obtained starting from
silicic acid and the kinetic parameters of cordierite crystallization from the gel, were
also investigated in this dissertation. Cordierite powders for the sintering investigation
were obtained by the gels calcination at a temperature where α-cordierite is formed or at
a temperature where densification without crystallization of the silica-containing
component occurred. The influence of synthesis method, temperature of gel calcination,
duration of calcined gel grinding and temperature of sintering on microstructure and
mechanical properties of sintered materials was analyzed. In order to improve sintering
behavior of the cordierite powders, spark-plasma sintering was applied and results were
compared to those obtained by conventional sintering.
Starting from silicic acid and magnesium and aluminum salts, a homogeneous
monophasic cordierite gel was obtained, which was proved by μ-cordierite
crystallization at about 900 °C...
Abstract (sr)
Gusta kordijeritna keramika ima veliki značaj u nauci o materijalima i široku
primenu u industriji zahvaljujući malom koeficijentu toplotnog širenja kordijerita
(2MgO⋅2Al2O3⋅5SiO2), maloj dielektričnoj konstanti, velikoj specifičnoj otpornosti i
relativno velikoj vatrostalnosti. Kordijeritna keramika se može dobiti konvencionalnim
postupcima, ali je veoma teško sinterovanjem dobiti gust materijal, zbog veoma uskog
intervala sinterovanja kordijerita u blizini inkongruentne tačke topljenja. Pokušaji da se
problem uskog intervala sinterovanja reši aditivima omogućili su snižavanje
temperature nastajanja kordijerita i povećanje gustine gotovog proizvoda, ali su doveli
do pogoršanja željenih osobina, odnosno do povećanja koeficijenta toplotnog širenja i
dielektrične konstante. Zbog toga su poslednjih godina istraživanja u cilju dobijanja
guste kordijeritne keramike usmerena na sintezu prahova kordijerita poboljšane
sinterabilnosti. Različitim hemijskim postupcima sinteze mogu se dobiti fini prahovi
velike specifične površine, velike unutrašnje energije, a time i velike sinterabilnosti.
Sol-gel postupci imaju veliku primenu u sintezi prahova zahvaljujući mogućnosti
precizne kontrole hemijskog sastava prahova i sniženja temperature sinterovanja.
Predmet ove doktorske disertacije je ispitivanje sinterabilnosti kordijeritnih
prahova koji su sintetizovani alkoksidnim i koloidnim sol-gel postupkom, kao i sol-gel
postupkom u kome je kao polazni reaktant korišćena silicijumova kiselina, dobijena iz
vodenog stakla, kao jeftinog prekursora. Fazne transformacije i skupljanje tokom
termičkog tretmana gela dobijenog postupkom sa silicijumovom kiselinom, kao i
kinetika tih faznih transformacija su takođe proučene u ovoj doktorskoj disertaciji.
Kordijeritni prahovi za ispitivanje sinterabilnosti su dobijeni kalcinacijom suvih gelova
na temperaturi pri kojoj dolazi do viskoznog sinterovanja bez kristalizacije komponente
koja sadrži SiO2 i na temperaturi na kojoj nastaje α-kordijerit. Pri proučavanju
sinterabilnosti kordijeritnih prahova ispitan je uticaj: vrste sinteze gela, temperature
kalcinacije gelova, dužine trajanja mlevenja kalcinisanih gelova i temperature
sinterovanja na mikrostrukturne i mehaničke karakteristike dobijenih materijala...
Authors Key words
Cordierite, Sol-gel synthesis, Grinding, Conventional sintering, Spark-plasma sintering,
Microstructure, Mechanical properties
Authors Key words
Kordijerit, Sol-gel sinteza, Mlevenje, Konvencionalno sinterovanje, Spark-plazma
sinterovanje, Mikrostruktura, Mehanička svojstva
Classification
66.017:536.421.5
Type
Tekst
Abstract (en)
Dense cordierite-based ceramic is a promising material for technological
applications due to its low thermal expansion and dielectric constant, and high chemical
and thermal stability. Cordierite ceramics can be prepared by conventional methods,
such as solid state reaction technique and crystallization out of glasses. However, it is
difficult to sinter cordierite without sintering aids because of the narrow sintering range
just before its incongruent melting point. These aids, on the other hand, increase the
thermal expansion coefficient and dielectric constant. Some attempts have been made to
improve the sinterability of cordierite. By wet chemical routes, cordierite powders with
favorable sintering behavior can be synthesized. It is well known that the sol-gel method
has the advantage of an excellent control of chemical composition and the possibility of
reducing the sintering temperature.
In this dissertation, the sinterability of cordierite powders obtained by different
sol-gel methods was studied. The cordierite powders were synthesized by colloidal and
alkoxide sol-gel methods and starting from silicic acid and magnesium and aluminum
salts. Phase transformation and shrinkage during heating of gel obtained starting from
silicic acid and the kinetic parameters of cordierite crystallization from the gel, were
also investigated in this dissertation. Cordierite powders for the sintering investigation
were obtained by the gels calcination at a temperature where α-cordierite is formed or at
a temperature where densification without crystallization of the silica-containing
component occurred. The influence of synthesis method, temperature of gel calcination,
duration of calcined gel grinding and temperature of sintering on microstructure and
mechanical properties of sintered materials was analyzed. In order to improve sintering
behavior of the cordierite powders, spark-plasma sintering was applied and results were
compared to those obtained by conventional sintering.
Starting from silicic acid and magnesium and aluminum salts, a homogeneous
monophasic cordierite gel was obtained, which was proved by μ-cordierite
crystallization at about 900 °C...
“Data exchange” service offers individual users metadata transfer in several different formats. Citation formats are offered for transfers in texts as for the transfer into internet pages. Citation formats include permanent links that guarantee access to cited sources. For use are commonly structured metadata schemes : Dublin Core xml and ETUB-MS xml, local adaptation of international ETD-MS scheme intended for use in academic documents.