Title
Corrosion of steel with polyaniline based composite coatings
Creator
Salem, Ayad Abdelsalam Musa.
Copyright date
2018
Object Links
Select license
Autorstvo-Nekomercijalno-Bez prerade 3.0 Srbija (CC BY-NC-ND 3.0)
License description
Dozvoljavate samo preuzimanje i distribuciju dela, ako/dok se pravilno naznačava ime autora, bez ikakvih promena dela i bez prava komercijalnog korišćenja dela. Ova licenca je najstroža CC licenca. Osnovni opis Licence: http://creativecommons.org/licenses/by-nc-nd/3.0/rs/deed.sr_LATN. Sadržaj ugovora u celini: http://creativecommons.org/licenses/by-nc-nd/3.0/rs/legalcode.sr-Latn
Language
English
Cobiss-ID
Theses Type
Doktorska disertacija
description
Datum odbrane: 4. 8. 2018.
Other responsibilities
mentor
Grgur, Branimir, 1965-
član komisije
Gvozdenović, Milica, 1971-
član komisije
Jugović, Branimir.
Academic Expertise
Tehničko-tehnološke nauke
University
Univerzitet u Beogradu
Faculty
Tehnološko-metalurški fakultet
Alternative title
Korozija čelika sa kompozitnim prevlakama na bazi polianilina
Publisher
[A. A. M. Salem]
Format
101 list
description
Technological engineering-Chemical engineering / Tehnološko inženjerstvo-Hemijsko inženjerstvo
Abstract (en)
The chemically synthesized polyaniline in the powdered form by the procedure recommended by IUPAC is reprotonated using sulfamic, citric, succinic and acetic acid. Typical procedures for corrosion protection investigations based on UV-vis characterization, linear polarization measurements and optical microscopy investigations are developed with composite coatings based on well-characterized polyaniline doped with benzoate. The UV-vis spectroscopy is applied to estimate doping degree of the reprotonated samples. The estimated doping degrees are as follows: the polyaniline doped with sulfamic acid 0.28, with succinic acid 0.18, with citric acid 0.15 and with acetic acid 0.13. The composite coatings are prepared by mixing the alkyd based commercial paint with 5 wt.% of the reprotonated samples and painted on mild steel. Using linear polarization method, the polarization resistances of the composite and base coatings are determined in 3% NaCl over time. It is shown that initial oxidation state of the polyaniline, determined the values of polarization resistance which decrease in the following order: Rp(sulfamic) > Rp(succinic) > Rp(citric) > Rp(acetic) ~ Rp(base coating). For all composite coatings, increases in the corrosion potentials are observed during the time, while for the base coating decrease.
The higher area steel samples with base and composite coatings are also immersed in 3% NaCl. The corrosion current density is determined after 100 h in site using ASTM 1,10-phenanthroline method. The samples are also visually inspected, and by the optical microscope. It is shown that composite coatings reduce the possibility of blister formations and delamination. The corrosion current density and the appearance of the corrosion products closely follow the initial oxidation state of the polyaniline...
Abstract (sr)
Hemijski sintetisani polianilin u praškastoj formi postupkom preporučenim od strane IUPAC-a je reprotoniran pomoću sulfaminske, limunske, ćilibarne i sirćetne kiseline. Procedura za ispitivanje zaštite od korozije čelika zasnovana na UV-vis karakterizaciji, merenju linearne polarizacione otpornosti i ispitivanju optičkom mikroskopijom je razvijena na kompozitnom premazu zasnovanom na okarakterisanom polianilinu dopovanom benzoatom. UV-vis spektroskopija je primenjena za procenu stepena dopovanja reprotonovanih uzorka. Procenjeni stepeni dopovanja su bili sledeći: polianilin dopovan sa sulfaminskom kiselinom 0,28, sa ćilibarnom kiselinom 0,18, sa limunskom kiselinom 0,15 i sa sirćetnom kiselinom 0,13. Kompozitni premazi su pripremljeni mešanjem komercijalnog premaznog sredstva na bazi alkidne smole sa 5 mas.% reprotoniranih uzoraka polianilina i naneti na čelik. Koristeći metodu linearne polarizacije, određene su vrednosti polarizacione otpornosti kompozitnih i osnovnog premaza u 3% NaCl tokom vremena. Pokazano je da početno stanje oksidacije polianilina određuje vrednosti polarizacione otpornosti koja se smanjuje u sledećem redosledu: Rp (sulfaminska) > Rp (ćilibarna) > Rp (limunska) > Rp (sirćetna) ~ Rp (osnovni premaz). Kod svih kompozitnih premaza, tokom vremena je uočeno povećanje korozionog potencijala, dok je kod osnovnog premaza uočeno smanjuje.
Uzorci čelika veće površine sa osnovnim i kompozitnim premazima su takođe ispitani u 3% NaCl. Gustina struje korozije je određena nakon 100 h, određivanjem koncentracije jona gvožđa u rastvoru, koristeći ASTM 1,10-fenantrolin metod. Uzorci su takođe vizuelno pregledani i ispitani optičkim mikroskopom. Pokazano je da kompozitni premazi smanjuju mogućnost formiranja plikova i delaminacije. Gustina struje korozije i pojava korozionih produkata blisko prate početno oksidaciono stanje polianilina...
Authors Key words
Reprotonation, Organic acids, Doping degree, Delamination, Alkyd paints
Authors Key words
Reprotonacija, Organske kiseline, Stepen dopovanja, Delaminacija,
Alkidni premaz
Classification
66.017-036.7:547.551(043.3)
Type
Tekst
Abstract (en)
The chemically synthesized polyaniline in the powdered form by the procedure recommended by IUPAC is reprotonated using sulfamic, citric, succinic and acetic acid. Typical procedures for corrosion protection investigations based on UV-vis characterization, linear polarization measurements and optical microscopy investigations are developed with composite coatings based on well-characterized polyaniline doped with benzoate. The UV-vis spectroscopy is applied to estimate doping degree of the reprotonated samples. The estimated doping degrees are as follows: the polyaniline doped with sulfamic acid 0.28, with succinic acid 0.18, with citric acid 0.15 and with acetic acid 0.13. The composite coatings are prepared by mixing the alkyd based commercial paint with 5 wt.% of the reprotonated samples and painted on mild steel. Using linear polarization method, the polarization resistances of the composite and base coatings are determined in 3% NaCl over time. It is shown that initial oxidation state of the polyaniline, determined the values of polarization resistance which decrease in the following order: Rp(sulfamic) > Rp(succinic) > Rp(citric) > Rp(acetic) ~ Rp(base coating). For all composite coatings, increases in the corrosion potentials are observed during the time, while for the base coating decrease.
The higher area steel samples with base and composite coatings are also immersed in 3% NaCl. The corrosion current density is determined after 100 h in site using ASTM 1,10-phenanthroline method. The samples are also visually inspected, and by the optical microscope. It is shown that composite coatings reduce the possibility of blister formations and delamination. The corrosion current density and the appearance of the corrosion products closely follow the initial oxidation state of the polyaniline...
“Data exchange” service offers individual users metadata transfer in several different formats. Citation formats are offered for transfers in texts as for the transfer into internet pages. Citation formats include permanent links that guarantee access to cited sources. For use are commonly structured metadata schemes : Dublin Core xml and ETUB-MS xml, local adaptation of international ETD-MS scheme intended for use in academic documents.